(2018) Environmental Pollution_Ferric-enhanced chemical remediation of dredged marine sediment contaminated by metals and petroleum hydrocarbons

Yoo J., Jeon P., Tsang D.C.W., Kwon E.E., Baek K.

(Elsevier Ltd) Environmental Pollution ISSN: 2697491 Vol.243 Issue. Article No. DOI: 10.1016/j.envpol.2018.08.044

Sediments nearby harbors are dredged regularly, and the sediments require the stringent treatment to meet the regulations on reuse and mitigate the environmental burdens from toxic pollutants. In this study, FeCl₃ was chosen as an extraction agent to treat marine sediment co-contaminated with Cu, Zn, and total petroleum hydrocarbons (TPH). In chemical extraction process, the extraction efficiency of Cu and Zn by FeCl₃ was compared with the conventional one using inorganic acids (H₂SO₄ and HCl). Despite the satisfactory level for extraction of Cu (78.8%) and Zn (73.3%) by HCl (0.5 M) through proton-enhanced dissolution, one critical demerit, particularly acidified sediment, led to the unwanted loss of Al, Fe, and Mg by dissolution. Moreover, the vast amount of HCl required the huge amounts of neutralizing agents for the post-treatment of the sediment sample via the washing process. Despite a low concentration, extraction of Cu (70.1%) and Zn (69.4%) was done by using FeCl₃ (0.05 M) through proton-enhanced dissolution, ferric-organic matter complexation, and oxidative dissolution of sulfide minerals. Ferric iron (Fe³⁺) was reduced to ferrous iron (Fe²⁺) with sulfide (S^2-) oxidation during FeCl₃ extraction. In consecutive chemical oxidations using hydrogen peroxide (H₂O₂) and persulfate (S₂O₈^2-), the resultant ferrous iron was used to activate the oxidants to effectively degrade TPH. S₂O₈^2- using FeCl₃ solution (molar ratio of ferrous to S₂O₈^2- is 19.8–198.3) removed 42.6% of TPH, which was higher than that by H₂O₂ (molar ratio of ferrous to H₂O₂ is 1.2–6.1). All experimental findings suggest that ferric is effectively accommodated to an acid washing step for co-contaminated marine sediments, which leads to enhanced extraction, cost-effectiveness, and less environmental burden. © 2018 Elsevier Ltd

This research was supported by the Basic Science Research Program through the National Research Foundation of Korea ( NRF-2018R1A2B6004284 ) funded by the Ministry of Science and ICT and KEITI through GAIA project.